Why strains are developed in the model when a uniform temperature is applied to a model with remote point created with the beam formulation?
Tagged: remote-point, Uniform temperature
June 6, 2022 at 9:58 amFAQParticipant
The fundamental issue is that there is no temperature applied to the remote point nodes or there is no direct option to apply temperature to remote nodes. Since the beam formulation connects the nodes of the body to the remote point node, the nodes on the body have temperature specified and the node at the remote point does not, causing a temperature gradient. The workaround is to use command object to apply temperature to all nodes. Use bf command for all nodes in the model or use the tunif command.
Introducing Ansys Electronics Desktop on Ansys Cloud
The Watch & Learn video article provides an overview of cloud computing from Electronics Desktop and details the product licenses and subscriptions to ANSYS Cloud Service that are...
How to Create a Reflector for a Center High-Mounted Stop Lamp (CHMSL)
This video article demonstrates how to create a reflector for a center high-mounted stop lamp. Optical Part design in Ansys SPEOS enables the design and validation of multiple...
Introducing the GEKO Turbulence Model in Ansys Fluent
The GEKO (GEneralized K-Omega) turbulence model offers a flexible, robust, general-purpose approach to RANS turbulence modeling. Introducing 2 videos: Part 1 provides background information on the model and a...
Postprocessing on Ansys EnSight
This video demonstrates exporting data from Fluent in EnSight Case Gold format, and it reviews the basic postprocessing capabilities of EnSight.
- ANSYS Mechanical: Fatigue Crack Growth Analysis using SMART Crack Growth
- Does ECAD trace mapping support more than one type of trace material (usually copper) in the same layer?
- How can I understand Beam Probe results?
- Can the contact type (bonded or frictional) affect thermal results?
- Which time integration scheme is used in transient thermal analysis and how to change the scheme?
- Why there is difference in contact status between two load steps during Bolt Pretension? LS1: Bolt is Loaded LS2: Pretension is locked
- Static Structural Analysis of a Rear Upright – Part 1
- Modeling Radiative Heat Transfer
- What is pinball radius and does mesh size effect this value?
- How to define frictional coefficient as a function of relative sliding velocity
© 2023 Copyright ANSYS, Inc. All rights reserved.