June 6, 2022 at 8:33 amFAQParticipant
This phenomena could be observed if a particle histogram is evaluated at interface boundaries. Here it is important to distinguish between 1:1 interface and GGI. For 1:1 interfaces, there will be no data available on the interface sides and only zero values will be written into the .csv file. This is because the particle solver doesn’t see any boundary, the mesh is continuous and no data could be saved. Since R19.0 a warning message pointing to the usage of the 1:1 interface will be printed out. In the case of GGI, there will be data in the histogram .csv file available, but only for the outgoing particles at interface and not for the incoming particles. Since ANSYS CFX R18.2, a development fix is available and the .csv file will be filled with data at each interface side.
Introducing Ansys Electronics Desktop on Ansys Cloud
The Watch & Learn video article provides an overview of cloud computing from Electronics Desktop and details the product licenses and subscriptions to ANSYS Cloud Service that are...
How to Create a Reflector for a Center High-Mounted Stop Lamp (CHMSL)
This video article demonstrates how to create a reflector for a center high-mounted stop lamp. Optical Part design in Ansys SPEOS enables the design and validation of multiple...
Introducing the GEKO Turbulence Model in Ansys Fluent
The GEKO (GEneralized K-Omega) turbulence model offers a flexible, robust, general-purpose approach to RANS turbulence modeling. Introducing 2 videos: Part 1 provides background information on the model and a...
Postprocessing on Ansys EnSight
This video demonstrates exporting data from Fluent in EnSight Case Gold format, and it reviews the basic postprocessing capabilities of EnSight.
- ANSYS Fluent: Describing Cavitation in a Centrifugal Pump
- ANSYS Fluent: Efficient Modeling of Spray Breakup using VOF-to-DPM Transition
- Simulation of Exhaust Gas Recirculation (EGR) Cooler with CFD
- ANSYS Fluent: Lifeboat Launch – Overset & Dynamic Meshes with the Volume of Fluid Model
- How can I get the surface area or volume when using VOF model?
- Mixing Tank Modeling in ANSYS Fluent
- Hydrodynamics and Wave Impact Analysis
- Fluent: Simulating Multiphase Mixing within a Sparging Tank – Part 1
- Optimizing Solid Distribution in Continuous Stirred-Tank Reactor
- ANSYS Fluent: Simulating Multiphase Mixing within a Sparging Tank – Part 2