June 5, 2023 at 7:05 amFAQParticipant
If there is a small gap in the contact, this could make the parts in the contact fly apart when the contact status is open. It is suggested to add offset value in the contact with the option ‘Add Offset, No Ramping’ or use ‘Adjust to touch’ option. If you check the initial contact information, you can get initial gap value. Which you can input as offset in the contact.
Introducing Ansys Electronics Desktop on Ansys Cloud
The Watch & Learn video article provides an overview of cloud computing from Electronics Desktop and details the product licenses and subscriptions to ANSYS Cloud Service that are...
How to Create a Reflector for a Center High-Mounted Stop Lamp (CHMSL)
This video article demonstrates how to create a reflector for a center high-mounted stop lamp. Optical Part design in Ansys SPEOS enables the design and validation of multiple...
Introducing the GEKO Turbulence Model in Ansys Fluent
The GEKO (GEneralized K-Omega) turbulence model offers a flexible, robust, general-purpose approach to RANS turbulence modeling. Introducing 2 videos: Part 1 provides background information on the model and a...
Postprocessing on Ansys EnSight
This video demonstrates exporting data from Fluent in EnSight Case Gold format, and it reviews the basic postprocessing capabilities of EnSight.
- Does ECAD trace mapping support more than one type of trace material (usually copper) in the same layer?
- How to define frictional coefficient as a function of relative sliding velocity
- ANSYS Mechanical: Fatigue Crack Growth Analysis using SMART Crack Growth
- How can I understand Beam Probe results?
- Can the contact type (bonded or frictional) affect thermal results?
- What is the difference between secant and instantaneous coefficients of thermal expansion (CTE)?
- What does ambient temperature represent when using surface to surface radiation?
- What is pinball radius and does mesh size effect this value?
- Which time integration scheme is used in transient thermal analysis and how to change the scheme?
- Static Structural Analysis of a Rear Upright – Part 1