-
-
March 17, 2023 at 1:11 pm
Solution
ParticipantThe Fluent module to take into account the influence of sunlight (Solar Load Module) is standard. To perform a heat flow analysis using this, it is possible to take into account the influence of solar radiation (heat generated in the wall due to solar radiation). Note: It is particularly useful in carrying out the analysis of an indoor air conditioning or car air conditioning. See the attached file for an animation example of a solar radiation example in a car. In particular, the procedure is as follows: 1.Specify the date, time and location (latitude and longitude) 2.Specify the amount of heat generated in the spot where sunlight is present a.Calculates the sunlight strength Ya for the specified conditions in 1. b.Effects of direct/diffuse solar radiation blocked by walls, scattering etc can also be taken into account 3.Start the heat flow calculation In addition, it is also possible to carry out a non-steady-state calculation. Please refer to the following solutions: 2043412Solar Load Module 2043410Solar Load Module (specified orientation and latitude and longitude) 2043401Solar Load Module (distinction of visible light and infrared light) 2043400Solar Load Module (for internal scattering) 2043405Solar Load Module (boundary conditions other than the wall) 2043407Solar Load Module (note of the amount of solar radiation update) 2043335Solar Load Module (post-processing) Attachment: 2042014.gif
Attachments:
1. 2042014.gif
2. 2042014.pdf
-

Introducing Ansys Electronics Desktop on Ansys Cloud
The Watch & Learn video article provides an overview of cloud computing from Electronics Desktop and details the product licenses and subscriptions to ANSYS Cloud Service that are...

How to Create a Reflector for a Center High-Mounted Stop Lamp (CHMSL)
This video article demonstrates how to create a reflector for a center high-mounted stop lamp. Optical Part design in Ansys SPEOS enables the design and validation of multiple...

Introducing the GEKO Turbulence Model in Ansys Fluent
The GEKO (GEneralized K-Omega) turbulence model offers a flexible, robust, general-purpose approach to RANS turbulence modeling. Introducing 2 videos: Part 1Â provides background information on the model and a...

Postprocessing on Ansys EnSight
This video demonstrates exporting data from Fluent in EnSight Case Gold format, and it reviews the basic postprocessing capabilities of EnSight.
- Simulating Battery Pack Cooling System Using Ansys Fluent
- Thermal Analysis of a Radiator Using Ansys Fluent
- Defining heat transfer coefficient (HTC)
- ANSYS Fluent Student: Conjugate Heat Transfer in a Heat Sink
- ANSYS Fluent: Overview of the Mapped Interface Technique for CHT Simulations (18.2)
- How to set up a heat source in CFX in a subdomain that results in a constant temperature
- Tips for resolving unphysical temperatures and poor convergence with CHT cases.
- Plate Heat Exchanger Solver Setup in ANSYS Student – Part 1
- How much number of faces per cluster value should be used for S2S radiation model in ANSYS Fluent?
- What are the TUI commands to enable / disable Shell Conduction?
© 2023 Copyright ANSYS, Inc. All rights reserved.