-
-
January 31, 2023 at 8:55 am
FAQ
ParticipantPOLYFLOWのエボリューション計算や非定常計算は、デフォルトで毎ステップ出力するようになっていますが、 POLYDATAのOutputsから出力するタイミングを変えることが可能です。 設定方法 ——————————————————————————– 0.mshファイルとdatファイルを読み込みます。 1.”Outputs”をクリック 2.”Output triggering”をクリック 3.出力方法を選択します。 Output after N valid steps ステップ単位で出力 (default) Output after dt指定の時間幅を通過すると出力 Output at exact dt 指定のdtごとに出力 Output at exact t value出力する時間を指定する 4.出力間隔を設定します。 Enter the number of steps Output after N valid stepsの出力するステップ間隔を指定(default 1) Enter the dt interval 出力時間間隔(dt)を指定する。 Modify list of t values Output at exact t valueの出力する時間を指定する(最大50)
-

Introducing Ansys Electronics Desktop on Ansys Cloud
The Watch & Learn video article provides an overview of cloud computing from Electronics Desktop and details the product licenses and subscriptions to ANSYS Cloud Service that are...

How to Create a Reflector for a Center High-Mounted Stop Lamp (CHMSL)
This video article demonstrates how to create a reflector for a center high-mounted stop lamp. Optical Part design in Ansys SPEOS enables the design and validation of multiple...

Introducing the GEKO Turbulence Model in Ansys Fluent
The GEKO (GEneralized K-Omega) turbulence model offers a flexible, robust, general-purpose approach to RANS turbulence modeling. Introducing 2 videos: Part 1 provides background information on the model and a...

Postprocessing on Ansys EnSight
This video demonstrates exporting data from Fluent in EnSight Case Gold format, and it reviews the basic postprocessing capabilities of EnSight.
- STLファイルのエクスポートは可能ですか?
- エラーメッセージ:Signal caught: Abnormal termination について
- Mesh Interfaceで周期境界を設定する方法
- resファイルからモニターデータをcsvで出力する方法
- CFD-POSTで、最大値と最小値の場所を表示する方法は?
- MSMD Battery Model 短絡のモデル化について
- Fluentでのcasとdatファイルの読み込み注意点
- Windowsでバックグラウンド実行時Fluentソルバーの停止とファイル保存
- 境界条件をコピーする際の注意点
- フェイスがwallかどうかを判別する方法
© 2023 Copyright ANSYS, Inc. All rights reserved.