Tagged: 2019 R2, fluent, General - FLUENT
-
-
January 31, 2023 at 8:55 am
FAQ
Participantfuelcells module使用時に、物性の異なる複数の膜を設定する方法は以下の通りです。 1. Electrolyteタブで膜の設定の際に、膜のZoneを複数選択します。 2. Update Cell Zonesをオフにします。 3. その後、Cell Zones Conditionsパネルから、各Zoneの固体名を指定します。 (あらかじめ、Materialsパネルで固体の物性を設定しておきます) 4. Equivalent Weight, Protonic Conductivity Coefficient, Protonic Conductivity Exponent については、 PEMモジュールのUDFをカスタマイズすることで、 各Zoneごとにそれぞれ指定することができます。
-

Introducing Ansys Electronics Desktop on Ansys Cloud
The Watch & Learn video article provides an overview of cloud computing from Electronics Desktop and details the product licenses and subscriptions to ANSYS Cloud Service that are...

How to Create a Reflector for a Center High-Mounted Stop Lamp (CHMSL)
This video article demonstrates how to create a reflector for a center high-mounted stop lamp. Optical Part design in Ansys SPEOS enables the design and validation of multiple...

Introducing the GEKO Turbulence Model in Ansys Fluent
The GEKO (GEneralized K-Omega) turbulence model offers a flexible, robust, general-purpose approach to RANS turbulence modeling. Introducing 2 videos: Part 1 provides background information on the model and a...

Postprocessing on Ansys EnSight
This video demonstrates exporting data from Fluent in EnSight Case Gold format, and it reviews the basic postprocessing capabilities of EnSight.
- STLファイルのエクスポートは可能ですか?
- エラーメッセージ:Signal caught: Abnormal termination について
- Mesh Interfaceで周期境界を設定する方法
- resファイルからモニターデータをcsvで出力する方法
- CFD-POSTで、最大値と最小値の場所を表示する方法は?
- MSMD Battery Model 短絡のモデル化について
- Fluentでのcasとdatファイルの読み込み注意点
- Windowsでバックグラウンド実行時Fluentソルバーの停止とファイル保存
- 境界条件をコピーする際の注意点
- フェイスがwallかどうかを判別する方法
© 2023 Copyright ANSYS, Inc. All rights reserved.