NVIDIA Tesla K40cやK20xmなどのKeplerアーキテクチャのGPUを使用して、2021R1またはR2のMechanical APDL GPUアクセラレーションを実行するとエラーになる
Tagged: 2021 R1, HPC/Parallel, Mechanical APDL - SYS
-
-
January 31, 2023 at 9:47 am
FAQ
ParticipantWindowsまたはLinuxで、NVIDIA Tesla K40cやK20xmなどのKeplerアーキテクチャのGPUを使用して、2021 R1またはR2のMechanical APDL GPUアクセラレーションを実行すると、 以下のエラーまたは警告が表示されて失敗するか、またはGPUアクセラレーションを使用せずに続行されます。 *** ERROR *** CP =3.107 TIME= 16:32:26 A generic error has occurred when using the GPU accelerator capability. Error code = 209 which translates to: no kernel image is available for execution on the device. Please rerun without using the GPU accelerator capability. Please send the data leading to this operation to your technical support provider, as this will allow ANSYS, Inc to improve the program. Error during call to matrix factor routine on GPU!! Error code = 209. *** WARNING *** CP = 14.225 TIME= 15:02:00 An unexpected error has occurred while using the GPU accelerator capability. This feature is being disabled. Please send the data leading to this operation to your technical support provider, as this will allow ANSYS, Inc to improve the program. Mechanical APDL 2021 R1でKeplerカードのGPUアクセラレーションのサポートは中止されました。 最新の推奨GPU(A100、GV100など)にすぐにアップグレードできない場合は、以下の回避策をお試しください。 • Linux: v211/ansys/lib/linx64/nvidiaフォルダの名前を変更します。v202/ansys/lib/linx64/nvidiaをv211/ansys/lib/linx64にコピーします(cp -R)。 • Windows: v211ansysbinwinx64GPUNVIDIAフォルダの名前を変更します。v202ansysbinwinx64GPUNVIDIAフォルダをv211ansysbinwinx64GPUにコピーします。 上記の回避策では、2021 R1またはR2のCUDAライブラリファイルをバージョン11.0から10.0にダウングレードすることにより、KeplerシリーズのGPUでのGPUアクセラレーションを有効にしています。
-

Introducing Ansys Electronics Desktop on Ansys Cloud
The Watch & Learn video article provides an overview of cloud computing from Electronics Desktop and details the product licenses and subscriptions to ANSYS Cloud Service that are...

How to Create a Reflector for a Center High-Mounted Stop Lamp (CHMSL)
This video article demonstrates how to create a reflector for a center high-mounted stop lamp. Optical Part design in Ansys SPEOS enables the design and validation of multiple...

Introducing the GEKO Turbulence Model in Ansys Fluent
The GEKO (GEneralized K-Omega) turbulence model offers a flexible, robust, general-purpose approach to RANS turbulence modeling. Introducing 2 videos: Part 1 provides background information on the model and a...

Postprocessing on Ansys EnSight
This video demonstrates exporting data from Fluent in EnSight Case Gold format, and it reviews the basic postprocessing capabilities of EnSight.
- Ansys 2021R1は、SOLIDWORKS 2020をサポートしていますか?
- Ansys License Manager 2020R1でドングルライセンスが起動しません
- Ansys HFSSがクライアントマシン(Windows)にインストールされ、ライセンスサーバー(Linux)に接続されていますが、ライセンスを使用できません
- Elastic Licensingを使用しているときに、AEDTアプリケーションでライセンスが多く消費されてしまう場合の対処方法
- Ansys Electronics Desktopで、Elastic Licensingの使用中に発生した”Session ID not found”エラーを解決する方法
- アプリケーション終了後もライセンスがロックされて解放されず、ライセンスプールに戻されない
- AEDTが1055ポートと2325ポートに接続しているのに動作しません
- VPNを使用してデフォルトのIntel MPIを使用している場合、解析が失敗することがあります。
- Ansys Rocky 2021R2 インストールを開始できない場合
- Ansys Speos 2022Rx インストール手順
© 2023 Copyright ANSYS, Inc. All rights reserved.