Licensing

Licensing

  1. All Categories
  2. Additional Products - Licensing
  3. NVIDIA Quadro RTX 6000 and NVIDIA Quadro RTX 8000 should be supported and recommended GPU accelerators for ANSYS Mechanical APDL, but still gets below error in output file and solving crashes: *** FATAL *** CP = 0.297 TIME= 14:02:29 No recommended GPU devices have been detected on machine chqt5810tlab5.ansys.com. Only Tesla-series or Quadro P5000/P6000/GP100/GV100/RTX6000/RTX8000 GPU devices are recommended at this release. For optimal performance, install a recommended GPU device in this machine. If you wish to use an alternative GPU device, please review the recommendations in the section titled “Requirements for the GPU Accelerator in Mechanical APDL” in the Installation Guide for your platform.

NVIDIA Quadro RTX 6000 and NVIDIA Quadro RTX 8000 should be supported and recommended GPU accelerators for ANSYS Mechanical APDL, but still gets below error in output file and solving crashes: *** FATAL *** CP = 0.297 TIME= 14:02:29 No recommended GPU devices have been detected on machine chqt5810tlab5.ansys.com. Only Tesla-series or Quadro P5000/P6000/GP100/GV100/RTX6000/RTX8000 GPU devices are recommended at this release. For optimal performance, install a recommended GPU device in this machine. If you wish to use an alternative GPU device, please review the recommendations in the section titled “Requirements for the GPU Accelerator in Mechanical APDL” in the Installation Guide for your platform.

Tagged: , , ,

    • March 17, 2023 at 9:00 am
      FAQFAQ
      Participant

      It’s a known issue in 2020 R2 and prior releases, the workaround is to set environment variable ANSGPU_OVERRIDE=1. 2021 R1 and newer releases will fix this issue.

Featured Articles

Introducing Ansys Electronics Desktop on Ansys Cloud

The Watch & Learn video article provides an overview of cloud computing from Electronics Desktop and details the product licenses and subscriptions to ANSYS Cloud Service that are...

How to Create a Reflector for a Center High-Mounted Stop Lamp (CHMSL)

This video article demonstrates how to create a reflector for a center high-mounted stop lamp. Optical Part design in Ansys SPEOS enables the design and validation of multiple...

Introducing the GEKO Turbulence Model in Ansys Fluent

The GEKO (GEneralized K-Omega) turbulence model offers a flexible, robust, general-purpose approach to RANS turbulence modeling. Introducing 2 videos: Part 1 provides background information on the model and a...

Postprocessing on Ansys EnSight

This video demonstrates exporting data from Fluent in EnSight Case Gold format, and it reviews the basic postprocessing capabilities of EnSight.

© 2023 Copyright ANSYS, Inc. All rights reserved.