General

General

  1. All Categories
  2. General
  3. In Additive Print Product, are there any instructions for simulating parts attached to the baseplate with minimum support height=zero?

In Additive Print Product, are there any instructions for simulating parts attached to the baseplate with minimum support height=zero?

Tagged: , ,

    • May 15, 2023 at 8:32 am
      SolutionSolution
      Participant

      When you simulate a part directly on the baseplate with minimum support height set to 0, there are variations in the assumptions at bottom of the part depending upon the outputs a user selects. Varying combinations of “Simulate Part On Baseplate without Additional Supports” and “Displacement After Cutoff” settings result in different assumptions. The attached article describes the different assumption variations.

      Attachments:
      1. Simulating%20parts%20with%20support%20for%20Additive%20Print.pdf

Featured Articles

Introducing Ansys Electronics Desktop on Ansys Cloud

The Watch & Learn video article provides an overview of cloud computing from Electronics Desktop and details the product licenses and subscriptions to ANSYS Cloud Service that are...

How to Create a Reflector for a Center High-Mounted Stop Lamp (CHMSL)

This video article demonstrates how to create a reflector for a center high-mounted stop lamp. Optical Part design in Ansys SPEOS enables the design and validation of multiple...

Introducing the GEKO Turbulence Model in Ansys Fluent

The GEKO (GEneralized K-Omega) turbulence model offers a flexible, robust, general-purpose approach to RANS turbulence modeling. Introducing 2 videos: Part 1 provides background information on the model and a...

Postprocessing on Ansys EnSight

This video demonstrates exporting data from Fluent in EnSight Case Gold format, and it reviews the basic postprocessing capabilities of EnSight.

© 2023 Copyright ANSYS, Inc. All rights reserved.