-
-
January 25, 2023 at 7:28 am
FAQ
ParticipantThis Solution describes how to fix the issue when DM on Windows does not start and the following WB error message AnsysWBU.exe encountered a problem. A diagnostic file has been written: C:Users
AppdataLocalTempAnsysWBDumpFile.dmp and DM error message Unable to start the geometry editor. Kann den Geometrie-Editor nicht starten. is obtained. 1) Check that the graphics card driver is up to date. 2) Unconfigure and re-configure the product and CAD installation with “Product & CAD Configuration” tool available from the Start menue. 3) Is the issue user specific, i.e. try with a different user login? a) open %APPDATA% and rename or remove the directory “Ansys” b) open %TEMP% and rename or remove the directory “.ansys” c) restart WB and try to open DM again d) if the above does not help, re-create the user profile on the Windows machine 4) check Firewall and virus scanner settings, or deactivate temporarily
-

Introducing Ansys Electronics Desktop on Ansys Cloud
The Watch & Learn video article provides an overview of cloud computing from Electronics Desktop and details the product licenses and subscriptions to ANSYS Cloud Service that are...

How to Create a Reflector for a Center High-Mounted Stop Lamp (CHMSL)
This video article demonstrates how to create a reflector for a center high-mounted stop lamp. Optical Part design in Ansys SPEOS enables the design and validation of multiple...

Introducing the GEKO Turbulence Model in Ansys Fluent
The GEKO (GEneralized K-Omega) turbulence model offers a flexible, robust, general-purpose approach to RANS turbulence modeling. Introducing 2 videos: Part 1 provides background information on the model and a...

Postprocessing on Ansys EnSight
This video demonstrates exporting data from Fluent in EnSight Case Gold format, and it reviews the basic postprocessing capabilities of EnSight.
- When I am trying to launch Fluent, the GUI is stuck at this message. Host spawning Node 0 on machine “abcd-pc” (win64) There is no error. Same problem in serial mode I am not connected to VPN.
- Unexpected error: The following required addins could not be loaded: Ans.SceneGraphChart.scencegraphaddin. The software will exit
- Ansys Licensing: Managing Activations
- FLEXnet Licensing Error -96: Error getting status: License server machine is down or not responding. (-96,7:11001 “WinSock: Host not found (HOST_NOT_FOUND)”) ansyslmd: The desired vendor daemon is down. (-97,121)
- Installing ANSYS License Manager on Windows
- 2019R1 Workbench Fluent design point update (foreground in Solution and foreground in Parameter Set) stuck at end of 1st DP and doesn’t proceed to next DP. Fluent processes could not be terminated after iterations and cas/dat files are written in 1st DP.
- Unable to start the Geometry or Mechanical Editor (Linux)
© 2023 Copyright ANSYS, Inc. All rights reserved.