Tagged: Transient (Implicit)
-
-
June 6, 2022 at 9:58 am
FAQ
ParticipantIn transient structural analysis, the time step has to be small enough to describe the shape of the load impulse. At the same time, the time step should also be small to catch the significant mode shapes in the analysis. Usually, people set the Initial Time Step equal to the time period of the significant mode shape (usually the 1st modal shape) divided by 20. This may require you to run Modal analysis first to find the natural frequencies. The Initial time step is determined based upon the two factors above and pick the smaller one of them. After the Initial time step is determined, you can determine the Minimum time step and Maximum time step by factoring the Initial time step, or set them to the same value as the Initial time step.
See more instructions on ANSYS Help at “help/ans_str/Hlp_G_STR5_12.html#a5iQxq1e2mcm” or Mechanical APDL -> Structural Analysis Guide -> Transient Dynamic Analysis options -> Guidelines for Integration time step.
-

Introducing Ansys Electronics Desktop on Ansys Cloud
The Watch & Learn video article provides an overview of cloud computing from Electronics Desktop and details the product licenses and subscriptions to ANSYS Cloud Service that are...

How to Create a Reflector for a Center High-Mounted Stop Lamp (CHMSL)
This video article demonstrates how to create a reflector for a center high-mounted stop lamp. Optical Part design in Ansys SPEOS enables the design and validation of multiple...

Introducing the GEKO Turbulence Model in Ansys Fluent
The GEKO (GEneralized K-Omega) turbulence model offers a flexible, robust, general-purpose approach to RANS turbulence modeling. Introducing 2 videos: Part 1 provides background information on the model and a...

Postprocessing on Ansys EnSight
This video demonstrates exporting data from Fluent in EnSight Case Gold format, and it reviews the basic postprocessing capabilities of EnSight.
- How can I change the normalization method of the vibration modes from modal analysis?
- Why does the prestress from Static analysis does not add up to the stress in Random Vibration analysis?
- In the results of a modal analysis, how can I define that a frequency is an output parameter ?
- A Shock absorber is represented as spring element with damping constant. Modal analysis is performed using Reduced Damped (QRDAMP) solver. How to perform a Modal super position harmonic or transient analysis further ?
- What does the warning “Diagonal of the mass matrix is missing in file” indicate when using RSTMAC command?
- Why is damped frequency is lower than undamped frequency with viscous damping but larger with structural damping?
- How do I get a frequency response of acceleration in the radial direction of a cylinder?
- In a Modal Analysis of Mechanical, why aren’t the Participation Factors Summary under Solution Information displayed?
- What is mass moment of inertia in Point Mass used for?
- How to solve for harmonic response at a specific frequency in Workbench?
© 2023 Copyright ANSYS, Inc. All rights reserved.