Tagged: 12.1, fluent, fluid-dynamics, General, General - FLUENT
January 25, 2023 at 7:16 amFAQParticipant
For a good quality mesh, skweness, aspect ratio, and the size change value should be under limit. Aspect ratio and the skewness represent the quality of a single cell, whereas the size change represents the ratio of the size of a cell to its neighboring cell. By definition, 0
0. Aspect Ratio >1 For good quality mesh, the skewness must be less than 0.9 (good 0-0.9, average 0.9-0.95, poor > 0.95). There is no limit for the aspect ratio and the size range. However, it is better to limit these two. Aspect ratio should be < 10 in the domain and < 100 in the boundary layers. Size change should be < 10. Depending on the problem, region of interest, accuracy of the solution, etc, the limit varies. 1.Skewness is defined as the difference between the shape of the cell and the shape of an equilateral cell of equivalent volume. 2.The Size Change specification represents the maximum ratio of the area (for 2-D elements) or volume (for 3-D elements) of an element relative to its neighboring elements. By definition, size change > 0. Size change value 1 represents an element that is surrounded by elements the areas or volumes of which are exactly equal to its own. 3.The “aspect ratio” is a measure of the stretching of a cell, and is defined as the ratio of the maximum distance between the cell centroid and face centroids to the minimum distance between the nodes of the cell
Introducing Ansys Electronics Desktop on Ansys Cloud
The Watch & Learn video article provides an overview of cloud computing from Electronics Desktop and details the product licenses and subscriptions to ANSYS Cloud Service that are...
How to Create a Reflector for a Center High-Mounted Stop Lamp (CHMSL)
This video article demonstrates how to create a reflector for a center high-mounted stop lamp. Optical Part design in Ansys SPEOS enables the design and validation of multiple...
Introducing the GEKO Turbulence Model in Ansys Fluent
The GEKO (GEneralized K-Omega) turbulence model offers a flexible, robust, general-purpose approach to RANS turbulence modeling. Introducing 2 videos: Part 1 provides background information on the model and a...
Postprocessing on Ansys EnSight
This video demonstrates exporting data from Fluent in EnSight Case Gold format, and it reviews the basic postprocessing capabilities of EnSight.
- ANSYS Fluent: Introduction to the GEKO Turbulence Model Part I
- How can I create a Cell Register from a Cell Zone?
- ANSYS System Coupling: Two Way Fluid Structure Interaction – Part 1
- Delete or Deactivate Zone in Fluent
- Left-handed faces troubleshooting
- Running Python Script from Workbench
- ANSYS Polyflow: Adaptive Meshing Based on Contact
- Check CPU Time in ANSYS FLUENT
- Apply Custom Material Properties in Fluent
- How to overcome the model information incompatible with incoming mesh error?
© 2023 Copyright ANSYS, Inc. All rights reserved.