March 17, 2023 at 1:11 pmSolutionParticipant
Attached is an example of performing springback analysis in LS-DYNA using the seamless method. In the seamless method, LS-DYNA begins by performing an explicit forming simulation. When the termination time is reached, LS-DYNA automatically and seamlessly switches to the implicit method, and continues with the springback simulation. At the time of switching, a user-specified list of parts (the sheet blank) are retained as active, and the remaining parts (the rigid tools) are deleted from the model. All contact interfaces are also automatically deleted. An optional list of nodal constraints are activated to eliminate rigid body motion after the tools are removed for the static springback simulation. After switching seamlessly, LS-DYNA proceeds to perform a static implicit springback simulation. A special set of defaults are used which eliminate all requirements for *CONTROL_IMPLICIT keyword input. These alternate “springback” defaults are identified clearly in the user’s manual, and affect the time step size, artificial stabilization, and automatic time step control parameters. Default parameter values can be overridden by including optional *CONTROL_IMPLICIT keywords into the forming input deck.
Introducing Ansys Electronics Desktop on Ansys Cloud
The Watch & Learn video article provides an overview of cloud computing from Electronics Desktop and details the product licenses and subscriptions to ANSYS Cloud Service that are...
How to Create a Reflector for a Center High-Mounted Stop Lamp (CHMSL)
This video article demonstrates how to create a reflector for a center high-mounted stop lamp. Optical Part design in Ansys SPEOS enables the design and validation of multiple...
Introducing the GEKO Turbulence Model in Ansys Fluent
The GEKO (GEneralized K-Omega) turbulence model offers a flexible, robust, general-purpose approach to RANS turbulence modeling. Introducing 2 videos: Part 1 provides background information on the model and a...
Postprocessing on Ansys EnSight
This video demonstrates exporting data from Fluent in EnSight Case Gold format, and it reviews the basic postprocessing capabilities of EnSight.
- The LS-DYNA equivalent of *MODEL_CHANGE card (in ABAQUS). Which keywords can be used to introduce(activate)/delete(deactivate) elements in the middle of a calculation (at user-specific time/load steps).
- The warning message is: “The maximum contact stiffness is too big. This may affect the accuracy of the results.” Why does large contact stiffness affect results accuracy?
- Contact Definitions in ANSYS Workbench Mechanical
- How to deal with “”Problem terminated — energy error too large””?”
- After Workbench crashes, how can I recover the project from a .mechdb file?
- How to display the color of each body based on the material in Mechanical?
- How to resolve “Error: Invalid Geometry”?
- Model has a large number of contacts – how to reduce them?
- Please explain the difference between Point Mass and Distributed Mass.
- How to locate an element of a particular ID number in Mechanical?