-
-
January 25, 2023 at 7:34 am
FAQ
ParticipantThe viscosity for acoustic fluid elements 30/220/221 is a bulk viscosity term, not a shear viscosity term. Set up a modal (FLUID30) and harmonic analysis (FLUID80). The excitation for the FLUID80 model could be base excitation for the cantilever beam (for example). Then, check the results (e.g., response at tip) to see if all of the modes of interest can be captured. Once this is done, one can add damping (MP,VISC) in the FLUID80 model to see how the frequencies change with viscosity.
-

Introducing Ansys Electronics Desktop on Ansys Cloud
The Watch & Learn video article provides an overview of cloud computing from Electronics Desktop and details the product licenses and subscriptions to ANSYS Cloud Service that are...

How to Create a Reflector for a Center High-Mounted Stop Lamp (CHMSL)
This video article demonstrates how to create a reflector for a center high-mounted stop lamp. Optical Part design in Ansys SPEOS enables the design and validation of multiple...

Introducing the GEKO Turbulence Model in Ansys Fluent
The GEKO (GEneralized K-Omega) turbulence model offers a flexible, robust, general-purpose approach to RANS turbulence modeling. Introducing 2 videos: Part 1Â provides background information on the model and a...

Postprocessing on Ansys EnSight
This video demonstrates exporting data from Fluent in EnSight Case Gold format, and it reviews the basic postprocessing capabilities of EnSight.
- How can I change the normalization method of the vibration modes from modal analysis?
- In the results of a modal analysis, how can I define that a frequency is an output parameter ?
- Why does the prestress from Static analysis does not add up to the stress in Random Vibration analysis?
- A Shock absorber is represented as spring element with damping constant. Modal analysis is performed using Reduced Damped (QRDAMP) solver. How to perform a Modal super position harmonic or transient analysis further ?
- What does the warning “Diagonal of the mass matrix is missing in file” indicate when using RSTMAC command?
- Why is damped frequency is lower than undamped frequency with viscous damping but larger with structural damping?
- How do I get a frequency response of acceleration in the radial direction of a cylinder?
- In a Modal Analysis of Mechanical, why aren’t the Participation Factors Summary under Solution Information displayed?
- What is mass moment of inertia in Point Mass used for?
- How to solve for harmonic response at a specific frequency in Workbench?
© 2023 Copyright ANSYS, Inc. All rights reserved.