April 5, 2023 at 2:32 pmFAQParticipant
The discrepancy probably is caused by the methods used to extract the stress results that are plotted. For the contour plot, the stresses are calculated at the element Gaussian points and extrapolated to the element nodes using the element shape functions. At each node, the “unaveraged” element nodal stresses from each element attached to that node are averaged to determine the “averaged” nodal stress. Those nodal stresses are then used to create the contour plot. The values between the nodes are calculated by linearly interpolation. For the path plot, equally spaced locations along the path are identified (by default, Mechanical uses 47 locations). The stresses at these locations are calculated by extrapolating the Gaussian stresses (from element in which that location lies) using the shape functions. The stresses at those locations are then used to create the contour plot for the path. The path values between those locations are calculated by linearly interpolation. Thus, the same stress field can produce different contour and path results.
Introducing Ansys Electronics Desktop on Ansys Cloud
The Watch & Learn video article provides an overview of cloud computing from Electronics Desktop and details the product licenses and subscriptions to ANSYS Cloud Service that are...
How to Create a Reflector for a Center High-Mounted Stop Lamp (CHMSL)
This video article demonstrates how to create a reflector for a center high-mounted stop lamp. Optical Part design in Ansys SPEOS enables the design and validation of multiple...
Introducing the GEKO Turbulence Model in Ansys Fluent
The GEKO (GEneralized K-Omega) turbulence model offers a flexible, robust, general-purpose approach to RANS turbulence modeling. Introducing 2 videos: Part 1 provides background information on the model and a...
Postprocessing on Ansys EnSight
This video demonstrates exporting data from Fluent in EnSight Case Gold format, and it reviews the basic postprocessing capabilities of EnSight.
- The LS-DYNA equivalent of *MODEL_CHANGE card (in ABAQUS). Which keywords can be used to introduce(activate)/delete(deactivate) elements in the middle of a calculation (at user-specific time/load steps).
- The warning message is: “The maximum contact stiffness is too big. This may affect the accuracy of the results.” Why does large contact stiffness affect results accuracy?
- Contact Definitions in ANSYS Workbench Mechanical
- How to deal with “”Problem terminated — energy error too large””?”
- After Workbench crashes, how can I recover the project from a .mechdb file?
- How to display the color of each body based on the material in Mechanical?
- How to resolve “Error: Invalid Geometry”?
- Model has a large number of contacts – how to reduce them?
- Please explain the difference between Point Mass and Distributed Mass.
- How to locate an element of a particular ID number in Mechanical?