January 25, 2023 at 7:16 amFAQParticipant
For coupled wall, the general usage scenario of UDF macro DEFINE_HEAT_FLUX is to impose the heat flux from fluid side and then let Fluent do the thermal coupling between fluid and solid zones. So if you are affecting the macro DEFINE_HEAT_FLUX on the wall bc attached to the fluid side, you should not attach the same macro to the corresponding bc on the solid side. There is also an important note in Fluent documentation (see section 2.3.17. DEFINE_HEAT_FLUX of Fluent Customization Manual) on this point: *** Important: This function allows you to modify the heat flux at walls adjacent to a solid. Note, however, that for solids since only heat conduction is occurring, any extra heat flux that you add in a heat flux UDF can have a detrimental effect on the solution of the energy equation. These effects will likely show up in conjugate heat transfer problems. To avoid this, you will need to make sure that your heat flux UDF excludes the walls adjacent to solids, or includes only the necessary walls adjacent to fluid zones. *** Keywords: DEFINE_HEAT_FLUX, coupled wall, wall shadow
Introducing Ansys Electronics Desktop on Ansys Cloud
The Watch & Learn video article provides an overview of cloud computing from Electronics Desktop and details the product licenses and subscriptions to ANSYS Cloud Service that are...
How to Create a Reflector for a Center High-Mounted Stop Lamp (CHMSL)
This video article demonstrates how to create a reflector for a center high-mounted stop lamp. Optical Part design in Ansys SPEOS enables the design and validation of multiple...
Introducing the GEKO Turbulence Model in Ansys Fluent
The GEKO (GEneralized K-Omega) turbulence model offers a flexible, robust, general-purpose approach to RANS turbulence modeling. Introducing 2 videos: Part 1 provides background information on the model and a...
Postprocessing on Ansys EnSight
This video demonstrates exporting data from Fluent in EnSight Case Gold format, and it reviews the basic postprocessing capabilities of EnSight.
- Simulating Battery Pack Cooling System Using Ansys Fluent
- Thermal Analysis of a Radiator Using Ansys Fluent
- Defining heat transfer coefficient (HTC)
- ANSYS Fluent Student: Conjugate Heat Transfer in a Heat Sink
- ANSYS Fluent: Overview of the Mapped Interface Technique for CHT Simulations (18.2)
- How to set up a heat source in CFX in a subdomain that results in a constant temperature
- Tips for resolving unphysical temperatures and poor convergence with CHT cases.
- Plate Heat Exchanger Solver Setup in ANSYS Student – Part 1
- How much number of faces per cluster value should be used for S2S radiation model in ANSYS Fluent?
- What are the TUI commands to enable / disable Shell Conduction?