Tagged: 19, cortex, fluent, FLUENT - SYS, graphics, Installation/Licensing/Systems, Remote Display
January 25, 2023 at 7:28 amFAQParticipant
Applies to any version of Fluent Comments: These errors with the latest versions of Fluent are usually graphics issues. For example, you are remoting into a machine without OpenGL graphics and a certified, professional graphics card and are expecting the Fluent GUI to launch. If in the past, you have been remoting into a machine without graphics capabilities with low end, server side graphics card for IT administration and were successful with launching Fluent or any Ansys application. This will no longer work, especially with the newer releases of Ansys as the graphics requirements are much greater today than they were in the past. Resolution 1: You will need to have a graphics node with a certified, professional graphics card with the latest driver installed on the remote machine. https://www.ansys.com/-/media/ansys/corporate/files/pdf/solutions/it-professionals/platform-support/graphical-display-graphics-cards-tested-19.pdf?la=en On the graphics node, you will then be able to launch Fluent or any Ansys application interactively. You will also need to use one of the Remote Display tools that Ansys supports. Please see below for more information about Remote Display and Graphics Requirements. Remote Display Requirements https://www.ansys.com/-/media/ansys/corporate/files/pdf/solutions/it-professionals/platform-support/remote-display-and-virtual-desktop-support-19.pdf?la=en Resolution 2 : Check X11 forwarding Ensure that X11 forwarding is enabled (‘ssh -X’ when logging in using a terminal or, if accessing through Putty, under the menu ‘Connection’->’SSH’->’X11′ and tick to enable). Also ensure, if using a Windows machine, that Exceed (or equivalent Linux replicating software) is turned on and functional. Resolution 3: Comment out or delete all IPV6 information in the /etc/host file. For example, if you have the following in the /etc/host file put a pound symbol in front of each IBV6 entry. You might need to restart the network services. # special IPv6 addresses 184.108.40.206 localhost :1 localhost ipv6-localhost ipv6-loopback fe00::0 ipv6-localnet ff00::0 ipv6-mcastprefix ff02::1 ipv6-allnodes ff02::2 ipv6-allrouters ff02::3 ipv6-allhosts Resolution 4: Check your /etc/host file and verify that you are not having hostname problem. Also check that this is not a DNS issue. Contact your Systems Administrator for assistance. You can try the following: 1.In a Terminal window type: hostname (use the returned hostname in the next command) 2.Type: ping hostname It should return something as seen in the following example below: ping hostname.company.com (IP_ADDRESS) Verify that the IP_ADDRESS that was returned is the correct IP_ADDRESS for your hostname If it returns the error: “unknown host hostname” open up a Terminal Windows and CD to the /etc directory. Open up the hosts file. The hosts file should contain at least the following: 127.0.0.1 localhost IP_ADDRESS hostname.company.com hostname (Where IP_ADDRESS hostname.company.com hostname is the IP ADDRESS on the local machine name and then add the Fully Qualified Domain Name (FQDN)) 3.Make the desired updates and save the file. You might need to restart the network services. 4.Open up a new Terminal Window and try launching FLUENT again.
Introducing Ansys Electronics Desktop on Ansys Cloud
The Watch & Learn video article provides an overview of cloud computing from Electronics Desktop and details the product licenses and subscriptions to ANSYS Cloud Service that are...
How to Create a Reflector for a Center High-Mounted Stop Lamp (CHMSL)
This video article demonstrates how to create a reflector for a center high-mounted stop lamp. Optical Part design in Ansys SPEOS enables the design and validation of multiple...
Introducing the GEKO Turbulence Model in Ansys Fluent
The GEKO (GEneralized K-Omega) turbulence model offers a flexible, robust, general-purpose approach to RANS turbulence modeling. Introducing 2 videos: Part 1 provides background information on the model and a...
Postprocessing on Ansys EnSight
This video demonstrates exporting data from Fluent in EnSight Case Gold format, and it reviews the basic postprocessing capabilities of EnSight.
- When I am trying to launch Fluent, the GUI is stuck at this message. Host spawning Node 0 on machine “abcd-pc” (win64) There is no error. Same problem in serial mode I am not connected to VPN.
- Unexpected error: The following required addins could not be loaded: Ans.SceneGraphChart.scencegraphaddin. The software will exit
- Ansys Licensing: Managing Activations
- FLEXnet Licensing Error -96: Error getting status: License server machine is down or not responding. (-96,7:11001 “WinSock: Host not found (HOST_NOT_FOUND)”) ansyslmd: The desired vendor daemon is down. (-97,121)
- Unable to start the Geometry or Mechanical Editor (Linux)
- Installing ANSYS License Manager on Windows
- 2019R1 Workbench Fluent design point update (foreground in Solution and foreground in Parameter Set) stuck at end of 1st DP and doesn’t proceed to next DP. Fluent processes could not be terminated after iterations and cas/dat files are written in 1st DP.
© 2023 Copyright ANSYS, Inc. All rights reserved.