Tagged: ansys-workbench, meshing, Tessellation refinement
-
-
June 6, 2022 at 10:32 am
FAQ
ParticipantWhen one does assembly meshing in ANSYS Workbench Meshing, it uses Tgrid code for mesh generation. For that it translates data from CAD format to faceted format (like STL). By default, CAD data itself is represented in Meshing as underlying facets. In most cases, if the quality of imported geometry is good, keeping Tessellation Refinement value to default works. Alternatively, one can set this value to 0, which means that no refinement would be performed on existing CAD facets, and data transfer will be faster. On investigation (looking at failed mesh in case of mesh failure, looking for smallest edges and features, also deciding inflation layer height, etc.), if one feels that a user defined value for tessellation refinement maybe required, one can estimate what is the minimum mesh size which will be needed for this model. For example, if one determines that the minimum mesh size needed would be 1e-3 m, then re-specify the Tessellation Refinement Tolerance value again and set it to 1/10th of that value, i.e., 1e-4 m in this case.
-

Introducing Ansys Electronics Desktop on Ansys Cloud
The Watch & Learn video article provides an overview of cloud computing from Electronics Desktop and details the product licenses and subscriptions to ANSYS Cloud Service that are...

How to Create a Reflector for a Center High-Mounted Stop Lamp (CHMSL)
This video article demonstrates how to create a reflector for a center high-mounted stop lamp. Optical Part design in Ansys SPEOS enables the design and validation of multiple...

Introducing the GEKO Turbulence Model in Ansys Fluent
The GEKO (GEneralized K-Omega) turbulence model offers a flexible, robust, general-purpose approach to RANS turbulence modeling. Introducing 2 videos: Part 1Â provides background information on the model and a...

Postprocessing on Ansys EnSight
This video demonstrates exporting data from Fluent in EnSight Case Gold format, and it reviews the basic postprocessing capabilities of EnSight.
- Skewness in ANSYS Meshing
- ANSYS Workbench: Decomposition and Hex Meshing – Part II
- What is meaning of message: One or more objects may have lost some scoping attachments during the geometry update.
- What is hard/soft behavior in ANSYS Meshing?
- ANSYS Workbench: Decomposition and Hex Meshing – Part I
- How can I create a 2D section from a 3D model in SpaceClaim ?
- How to Fix the Error: “Mesh Exporter does not Support Overlapping Geometry in Named Selections”?
- ANSYS ICEM CFD: ANSYS Workbench Integration with Replay Control
- Why my 2D mesh is appearing as a 3D mesh with a thickness of one cell in Workbench Meshing?
- ANSYS Student: Meshing Best Practices for Students
© 2023 Copyright ANSYS, Inc. All rights reserved.