At ANSYS 8.1 it is supposed to be possible to postprocess velocity and acceleration in POST1 after a full transient analysis using commands such as PLNS,V,X or PLNS,A,X. Why doesn’t that work for me?
March 17, 2023 at 9:00 amFAQParticipant
The velocities and accelerations are not written to the results file by default. They must be requested with OUTRES,V,1 and OUTRES,A,1.
Introducing Ansys Electronics Desktop on Ansys Cloud
The Watch & Learn video article provides an overview of cloud computing from Electronics Desktop and details the product licenses and subscriptions to ANSYS Cloud Service that are...
How to Create a Reflector for a Center High-Mounted Stop Lamp (CHMSL)
This video article demonstrates how to create a reflector for a center high-mounted stop lamp. Optical Part design in Ansys SPEOS enables the design and validation of multiple...
Introducing the GEKO Turbulence Model in Ansys Fluent
The GEKO (GEneralized K-Omega) turbulence model offers a flexible, robust, general-purpose approach to RANS turbulence modeling. Introducing 2 videos: Part 1 provides background information on the model and a...
Postprocessing on Ansys EnSight
This video demonstrates exporting data from Fluent in EnSight Case Gold format, and it reviews the basic postprocessing capabilities of EnSight.
- Why is damped frequency is lower than undamped frequency with viscous damping but larger with structural damping?
- How can I specify acceleration at a node? Could I use the ‘big mass method’?
- How can I change the normalization method of the vibration modes from modal analysis?
- Is it possible to perform a sine-on-random vibration analysis in either Mechanical or Mechanical APDL?
- ANSYS Mechanical: Vibration Housing Noise
- In a Modal Analysis of Mechanical, why aren’t the Participation Factors Summary under Solution Information displayed?
- How to apply application-based settings to improve the performance and robustness of transient structural analyses?
- Why does the prestress from Static analysis does not add up to the stress in Random Vibration analysis?
- In Workbench Mechanical, how can I obtain strain energy output for Modal analysis?
- A Shock absorber is represented as spring element with damping constant. Modal analysis is performed using Reduced Damped (QRDAMP) solver. How to perform a Modal super position harmonic or transient analysis further ?