-
-
April 5, 2023 at 2:32 pm
FAQ
ParticipantThe answer is No. The Nastran .dmig file is a text file that acts basically like our superelement binary file (.sub). It is used to represent the stiffness (and mass) of the structure without supplying the FEA details. In order to do this in a practical manner, though, the user needs to specify the master DOF and perform a substructure analysis. Basically, we don’t just dump the [K] matrix from the .full file as a .dmig file because the .full file contains the entire FEA mesh and thus has a lot of unnecessary information. Instead, what should be done is to identify the ‘attachment points’ (where this model will ‘connect’ to other parts in the other model), and the stiffness (and mass) matrix of the subassembly will be calculated in a substructure generation pass. This is in the .sub file, which can then be exported to a .dmig file.
-

Introducing Ansys Electronics Desktop on Ansys Cloud
The Watch & Learn video article provides an overview of cloud computing from Electronics Desktop and details the product licenses and subscriptions to ANSYS Cloud Service that are...

How to Create a Reflector for a Center High-Mounted Stop Lamp (CHMSL)
This video article demonstrates how to create a reflector for a center high-mounted stop lamp. Optical Part design in Ansys SPEOS enables the design and validation of multiple...

Introducing the GEKO Turbulence Model in Ansys Fluent
The GEKO (GEneralized K-Omega) turbulence model offers a flexible, robust, general-purpose approach to RANS turbulence modeling. Introducing 2 videos: Part 1 provides background information on the model and a...

Postprocessing on Ansys EnSight
This video demonstrates exporting data from Fluent in EnSight Case Gold format, and it reviews the basic postprocessing capabilities of EnSight.
- Why is damped frequency is lower than undamped frequency with viscous damping but larger with structural damping?
- How can I specify acceleration at a node? Could I use the ‘big mass method’?
- How can I change the normalization method of the vibration modes from modal analysis?
- Why does the prestress from Static analysis does not add up to the stress in Random Vibration analysis?
- ANSYS Mechanical: Vibration Housing Noise
- In a Modal Analysis of Mechanical, why aren’t the Participation Factors Summary under Solution Information displayed?
- A Shock absorber is represented as spring element with damping constant. Modal analysis is performed using Reduced Damped (QRDAMP) solver. How to perform a Modal super position harmonic or transient analysis further ?
- Can you output the frequency response for a total deformation?
- Is it possible to perform a sine-on-random vibration analysis in either Mechanical or Mechanical APDL?
- In the results of a modal analysis, how can I define that a frequency is an output parameter ?
© 2023 Copyright ANSYS, Inc. All rights reserved.