A hot liquid droplet is exposed to a colder gaseous surrounding. Solidification/Melting model is activated to simulate the solidification of the liquid droplet. No solidification happens although the temperature fell below the defined Solidus Temperature. Why?
Tagged: 16.1, fluent, fluid-dynamics, MP - Free Surface Flow, multiphase, phase-change
-
-
January 25, 2023 at 7:17 am
FAQ
ParticipantA hot liquid droplet is exposed to a colder gaseous surrounding. Solidification/Melting is activated to simulate the solidification of the liquid droplet. Although the temperature has fallen below the defined Solidus Temperature in parts of the liquid region for some time steps, these parts are still not solidified. What could be a reason for this behavior? In the material panel of the liquid which is expected to melt or to solidify it is not only important to set the Solidus and Liquidus Temperature properly, but also the Pure Solvent Melting Heat. The default for this is zero and has to be modified to allow the phase change.
-

Introducing Ansys Electronics Desktop on Ansys Cloud
The Watch & Learn video article provides an overview of cloud computing from Electronics Desktop and details the product licenses and subscriptions to ANSYS Cloud Service that are...

How to Create a Reflector for a Center High-Mounted Stop Lamp (CHMSL)
This video article demonstrates how to create a reflector for a center high-mounted stop lamp. Optical Part design in Ansys SPEOS enables the design and validation of multiple...

Introducing the GEKO Turbulence Model in Ansys Fluent
The GEKO (GEneralized K-Omega) turbulence model offers a flexible, robust, general-purpose approach to RANS turbulence modeling. Introducing 2 videos: Part 1Â provides background information on the model and a...

Postprocessing on Ansys EnSight
This video demonstrates exporting data from Fluent in EnSight Case Gold format, and it reviews the basic postprocessing capabilities of EnSight.
- Solver message during DPM calculation: “number of stepsize underflows during particle integration step is x”. What does it mean and how to get rid of it?
- ANSYS Fluent: Efficient Modeling of Spray Breakup using VOF-to-DPM Transition
- ANSYS Fluent: Describing Cavitation in a Centrifugal Pump
- Simulation of Exhaust Gas Recirculation (EGR) Cooler with CFD
- Mixing Tank Modeling in ANSYS Fluent
- ANSYS Fluent: Lifeboat Launch – Overset & Dynamic Meshes with the Volume of Fluid Model
- Hydrodynamics and Wave Impact Analysis
- Optimizing Solid Distribution in Continuous Stirred-Tank Reactor
- ANSYS Fluent: Simulating Multiphase Mixing within a Sparging Tank – Part 1
- ANSYS Fluent: Simulating Multiphase Mixing within a Sparging Tank – Part 2
© 2023 Copyright ANSYS, Inc. All rights reserved.