Tagged: 2021 R1, contact, mechanical, structural-and-thermal
-
-
January 31, 2023 at 9:57 am
FAQ
Participant接触要素の9番目の実数定数TAUMAXに非ゼロ値を設定することによって可能になります。これで、接触ペア間で生じた最大摩擦応力は制限されます。WB Mechaicalでは、対象の接触に次のコマンドを挿入することによって、この定義が可能になります。 RMODIF,cid,9,taumax TAUMAXは応力の単位を持ち、一般にTAUMAX = (降伏強さ)/平方根(3) という式で計算されます。この計算には、接触(Contact)側の材料の降伏強さが使用されます。また、このコマンドを使用するときには、接触挙動は非対称(Asymmetric)に設定して、さらに軟質な材料を接触(Contact)側に設定することを推奨します。
-

Introducing Ansys Electronics Desktop on Ansys Cloud
The Watch & Learn video article provides an overview of cloud computing from Electronics Desktop and details the product licenses and subscriptions to ANSYS Cloud Service that are...

How to Create a Reflector for a Center High-Mounted Stop Lamp (CHMSL)
This video article demonstrates how to create a reflector for a center high-mounted stop lamp. Optical Part design in Ansys SPEOS enables the design and validation of multiple...

Introducing the GEKO Turbulence Model in Ansys Fluent
The GEKO (GEneralized K-Omega) turbulence model offers a flexible, robust, general-purpose approach to RANS turbulence modeling. Introducing 2 videos: Part 1 provides background information on the model and a...

Postprocessing on Ansys EnSight
This video demonstrates exporting data from Fluent in EnSight Case Gold format, and it reviews the basic postprocessing capabilities of EnSight.
- 指定した初期条件(温度)の値をプロットする方法を教えてください。
- Workbench Mechanicalで、質量輸送要素Solid70が定常熱シミュレーションで効果がないのはなぜですか。
- 数値丸めに起因する収束エラー
- Ansys Workbenchでのタイヤシミュレーション例はありますか。
- BEAM188は、せん断応力によって降伏しますか。
- 熱解析でサーフェスからの平均熱流量を得るには、どうすればよいですか。
- Mechanicalで断面図が非アクティブになっているのはなぜですか。
- リンク要素の断面積を定義する目的で、実数定数は使用できないのですか。
- ケーブル要素LINK180の初期ひずみを設定する方法を教えてください。
- カットバック係数は、時間増分にどのような影響を与えますか。
© 2023 Copyright ANSYS, Inc. All rights reserved.