シェルのエッジが実際には食い込んでいる場合でも、シェル要素の周辺部で一般的なエッジ間(edge-edge)接触(GCGEN経由)の初期距離が常にギャップ(”gap”)としてレポートされるのはなぜですか。
Tagged:
-
-
January 31, 2023 at 9:57 am
FAQ
Participantこれはコードの制限事項によるものです 。 解析の開始時点では、コードでギャップと食い込みを区別できません。 このような適用事例で機能するエッジ間(edge-edge)の接触(GCGEN,,,2経由)を得るには、解析の開始時点で実際のギャップが存在していることを確認します。 ピンボール領域に関係なく、ゼロギャップや小食い込みは機能しません。
-

Introducing Ansys Electronics Desktop on Ansys Cloud
The Watch & Learn video article provides an overview of cloud computing from Electronics Desktop and details the product licenses and subscriptions to ANSYS Cloud Service that are...

How to Create a Reflector for a Center High-Mounted Stop Lamp (CHMSL)
This video article demonstrates how to create a reflector for a center high-mounted stop lamp. Optical Part design in Ansys SPEOS enables the design and validation of multiple...

Introducing the GEKO Turbulence Model in Ansys Fluent
The GEKO (GEneralized K-Omega) turbulence model offers a flexible, robust, general-purpose approach to RANS turbulence modeling. Introducing 2 videos: Part 1 provides background information on the model and a...

Postprocessing on Ansys EnSight
This video demonstrates exporting data from Fluent in EnSight Case Gold format, and it reviews the basic postprocessing capabilities of EnSight.
- 任意の座標での結果を表示したい
- プローブで出力した結果をファイルにエクスポートする方法
- 2022R1 製品 Ansys Workbench、MechanicalおよびSpaceClaim の日本語表示不具合について(続報)
- 時刻歴解析で節点の”各方向の速度(加速度)”をテキストファイルに出力したい(複数節点)
- 複数インスタンスに対して、荷重をXMLファイルとして簡単にインポートする方法を教えてください。
- 接触は設定されていますが、認識に失敗し貫通してしまいます
- ジオメトリ(CAD)インターフェース:Ansys 2020R2でCreo Parametric 3.0は使用可能か
- MEMSキャパシタのフルCVカーブはどのようにシミュレーションすればいいでしょうか。 変形可能な1つの電極(ダイヤフラム)を備えた平行板キャパシタがあります。 プルイン前のCVカーブをシミュレーションできますが、フルCVカーブを得るために、プルイン状態後もシミュレーションできるのでしょうか。 電極の直接接触を防止するために設計されたポストにより、短絡は不可能です。
- スクリプトでのWorkbenchバッチ実行_計算エラー時に次のシステムを実行する方法
- 解析実行後に[結果情報]の[ソルバー出力]に表示される[SIMULATION ELAPSED TIME SUMMARY]で、[Elapsed Run Time in Solver]と[Total Elapsed Run Time]の違いは何ですか?これらの時間差が大きい場合、パフォーマンスの面で何らかの問題がありますか?
© 2023 Copyright ANSYS, Inc. All rights reserved.